LC6231/LC7181
5. Remove the 6 screws �F� holding the top shield (Fig. 5). Then remove the 3 screws �G� and the 2 screws �H� (Fig. 6). Now the top shield can be removed. 2. Remove screw �K� and connectors �L� (Fig. 8). Nor the DRB (Drive Boards) can be removed.
DRB Board
F F F
F
F
F
CL 266450004_049.eps 240402
K
L
CL 266450004_052.eps 240402
Fig. 5
Fig. 8
H
H
3.
Remove screw �L� (Fig. 9). Now the bottom shield can be removed.
L
G
G
G
CL 266450004_050.eps 24402
Fig. 6 4.2 Panel removal and service position 1.
Bottom Shield
Remove screw �I� and connectors �J� (Fig. 7). Now the SSB (Small Signal Board) can be removed. The SSB is plugged onto the DRB (Drive Board).
DRB Board
