Turn off and disconnect the projector before cleaning. 1 Press the Standby button twice to turn off the projector. � The Standby indicator light turns red. 2 Wait until the cooling fan has stopped (about 1 minute after the projector has been put in Standby) and disconnect the mains lead and all other cables. Cleaning the cabinet � When the cabinet is dusty, clean it by gently wiping with a soft cloth. � A chamois leather slightly moistened with water is sufficient for cleaning the housing. � Do not use cleaning agents as they may harm the housing. Cleaning the lens � When the lens is dirty or dusty, first blow the dust off and then gently wipe with a soft brush or lens cleaning paper. Never touch the lens with your fingers. � The lens is likely to become mouldy if left dirty.