7. Disconnect all the connectors from all the PWBs. 8. Remove the MAIN, HDMI and COMPONENT PWBs. 8-1. Remove the 3 lock screws 9 and the 2 lock screws 0. Detach the Chassis Frame. 8-2. Remove the 8 lock screws q and detach the MAIN PWB and HDMI/COMPONENT unit. 8-3. Remove the 4 lock screws w and detach the COMPONENT PWB from HDMI PWB. 9. Remove the 2 lock screws e and detach the R/C,LED PWB 10. Remove the 3 (LC-26GA6E) / 6 (LC-32GA6E) lock screws r and detach the INVERTER GND PWB. 11. LC-26GA6E : Remove the 4 lock screws t and detach the INVERTER PWB. LC-32GA6E : Remove the 8 lock screws t and detach the INVERTER-A and INVERTER-B PWBs. 12. Remove the 6 lock screws y and detach the LCD CONTROLLER PWB and Heat Sink. 13. Remove the 6 lock screws u and detach the POWER PWB. 14. Remove the 2 lock screws i and detach theSP BOX (L) and (R). (LC-26GA6E only)