|
No hay comentarios de productos.
LC-15B5H
12. Remove the two lock screws from the inverter PWB, and detach the inverter PWB. 13. Remove the one lock screw from the card frame cover over, and detach the card frame cover. 14. Remove the five lock screws from the main PWB, and undo the claw a. Detach the main PWB by lifting the area around the claws and pulling the PWB out. 15. Remove the five lock screws from the analog PWB, and undo the claws b and c. Detach the chassis frame (right) from the analog PWB by pulling out the terminals. In the same way, undo the claws d and e, and detach the chassis frame (left) from the analog PWB by pulling out the terminals. Note: When detaching the main PWB and analog PWB, be careful not to break the PWB-fixing claws. 16. Remove the one lock screw from the card LED PWB, and detach the card LED PWB. 17. Remove the four lock screws from the LCD panel unit, and detach the LCD panel unit.
15 15 13 14
Main PWB Analog PWB
14
a
d
Chassis Frame (L) b Card Frame Cover
12
16
c Chassis Frame (R)
e
Card LED PWB Inverter PWB
17
10
|
