the two black catches, that lock the friction pad, using a sharp-pointed item such as a ballpoint pen.
E Insert the new friction pad in the
TS4M101E
D Turn the paper tray to the original
position, and remove the friction pad from the tray.
paper tray. When inserting, note the following: A The three triangular projections should be facing toward the front side of the tray as shown in the illustration. B Align the center projection of the new friction pad to the spring of the paper tray. C Also, align the projections of both sides of the friction pad to the holes of the paper tray as shown in the illustration.
TS4M121E
F Push the friction pad until it locks
TS4M111E
securely.
Important � To be sure the friction pad is set correctly, gently push it a few times. If the friction pad rebounds with the force of the spring, the pad has been set correctly.
G Leave the paper
tray pulled out and go to P.148 �Replacing the paper feed roller�.