SUDS-MISER@ System
The SUDS-MISER� System has two drain hoses. One hose moves a portion of the used wash water into a storage tub, then back into the washer for use during the next wash. The other hose carries the wash water to a standpipe drain or to another tub with an open drain. A standpipe drain is available for placement in the drain opening of your tub. To order the in-tub standpipe, ask your nearest authorized Whirlpool dealer for Part Number 89121. If you do not want to re-use the wash water for a bad, leave out the stopper in the storage tub so the water can drain. To save wash water make sure the stopper is in the storage tub. NOTE: The SUDS-MISER@System does not save the rinse water from any cycle, nor does it save the wash water from the PERMANENT PRESS cycle.