No hay comentarios de productos.
For a Pre Wash
Use this settrnli for a sh#orter SOAK CYCLE (no rinse] Use enough1 detergent for a single wash. Add the load. l Set the LOAD SIZE SELECTOR. l Set wash water temperature
tf you want high agitation and a high-speed sprn. use the dot In REGULAR HEAVY. If you want low agrtation and a low-speed spin, use the dot In KNITS GENTLE Use the dot in PERMANENT PRESS If you want high agrtation and a low-speed spin.
For Spinning
There may want to drain out start over. To stop time, just push In Knob.
Only
be times when you all the wash water and the washer at any on the Cycle Control
Push the Cycle Control Knob in and turn It to the 12.minute mark rn the SOAK CYCLE l Pull the Control Kr ob out tc start the washer l The washer will fill agitate for two minutes, soak for eight minutes, agitate for two more, and then drain and spin
l
l
After filling, the washer may before starting to agitate.
pause
To set the washer spins water
so it drains
and
out of the load,
push in on
For Rinsing Only
Loads with towels, diapers, jeans or heavily sorled Items often need extra detergent Extradetergentcanrequire an extra rinse Your washer can be set to rinse only. Use the setting for an extra rinse, or for laundry that only needs a rinse and
the Control Knob, turn the dial to the right (clockwrse) so the pointer is touching the bar just before OFF in any cycle. The washer will drain, spin out water and stop. If you want a low-speed spin, use the bar on PERMANENT PRESS or KNITS GENTLE. All the other cycle settrngs have a high-speed spin
There IS o dot just after the numbers in PERMANENT PRESS, REGULAR HEAVY and KNITS GENTLE If you push in on the Cycle Control Knob, turn the pointer to one of those dots and pull the Control Knob out. the washer will fill, agitate, drain and spin.
|