Getting Fine Picture Step 1. At first Display, a full screen, such as, Window's background or "H" character should be achieved by using Editor (ex: Notepad. exe) Step 2. Adjust the screen to the center of the Display(LCD), by using the top and bottom display controls. (i.e.Using V-Position Adjust menu)
Step 3. Adjust the screen to the center of the Display(LCD), by using the right and left display controls. (i.e.Using Clock and H-Position adjust menu)
Step 4. Adjust the Clock-phase until the "H" Character displays clear.
Step 5. Using the Contrast. Brightness, and Color Control menu, set the color to your preference. Step 6. When you finish the adjustment, you can save your settings by pressing on the menu until the OSD screen has disappeared. Factory Setting & EEPROM Initialization Method Factory Setting Method - Connect the signal cable and power cable to the LCD monitor. - Press Power switch with pressed MENU key.(Menu key + Power key). - Then, a User can change the factory setting value in OSD menu. - Save changed value and Turn off the power s/w. - Turn on the power, adjust the screen.
