Automatic Answering Operation
To turn off the Answering System
Press [ANSWER ON].
� The indicator light goes out, and the unit announces �Answer off�. � To turn the Answering System off for one line when both lines are turned on, select the line which you want to leave on by pressing [LINE SELECT], then press [ANSWER ON].
Monitoring Incoming Calls Base Unit
While a caller is leaving a message, you can monitor the call through the base unit speaker. � To increase the speaker volume while monitoring, press [B]. To decrease volume, press [d]. � If both lines are receiving calls at the same time, only the first call can be monitored. To answer a call while monitoring, press the called line button on the base unit, or press the called line soft key ( LINE1 ) or ( LINE2 ) on the handset.
To turn the incoming call monitoring feature off
When the base unit is not in use, press [d] repeatedly until �0� is displayed. (Make sure the Answering System is turned on.) OR While monitoring, press [d] repeatedly until �0� is displayed. � If the incoming call monitoring feature is turned off, it will remain off when the next call is monitored. � If you adjust the speaker volume while playing back messages or using the speakerphone, the speaker volume for monitoring will be turned on again. To turn the speaker volume off, see �To turn the incoming call monitoring feature off� of above step.
