|
|
|
Usuarios conectados
Actualmente hay 5940 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Making Calls
To dial after confirming the entered number
1. Enter a phone number.
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
3334444|
� If you misdial, press the soft key ( CLEAR ). Enter the correct phone number. � If a pause is required when dialing, press the soft key ( PAUSE ) where needed (p. 56). � To cancel, press [OFF].
1. Press [REDIAL].
� The last number dialed is displayed.
2. Scroll to the desired number by pressing [d] or [B].
� You can also scroll down through the list by pressing [REDIAL]. � To exit the list, press [OFF].
2. Press [C] or [s]. 3. To hang up, press [OFF] or place the handset on the base unit or charger.
3. Press [C] or [s].
� To erase an item, scroll to the item then press the soft key ( ERASE ). � If �No items stored� is displayed, the list is empty.
To adjust the receiver/ speaker volume during a conversation
There are 3 volume levels for the receiver and 6 volume levels for the speaker.
To put a call on hold
1. Press [HOLD/INTERCOM] during a conversation.
� �Press extension# to transfer� is displayed. � To transfer the call to the base unit or another handset, see page 50; to transfer to a mailbox, see page 69.
To increase volume, press [B]. To decrease volume, press [d].
Ex. Receiver volume: High Speaker volume: Level 6
2. Press [HOLD/INTERCOM] again.
� �Hold� is displayed.
Volume
Low
dB
High
� The display shows the current volume setting. � If you try to increase/decrease volume when it is at the maximum/minimum level, the handset will beep 3 times.
To return to the call, press [C] or [s].
� The base unit user can also take the call by pressing [SP-PHONE]. � Another handset user can also take the call by pressing [C] or [s]. � If another phone is connected on the same line (p. 12), you can also take the call by lifting its handset. � If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.
To redial the last number dialed
Press [C] or [s], then press [REDIAL].
28
|
|
|
> |
|
