TG2411C(e).book Page 21 Wednesday, January 26, 2005 4:10 PM
Useful Information Making/answering calls, paging
Problem Static is heard, sound cuts in and out. Interference from other electrical units. Cause & solution L Move the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Raise the base unit antenna. L If your unit is connected to a telephone line with xDSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your xDSL provider for details. L The ringer volume is turned off. Adjust it (page 17). L The dialing mode may be set incorrectly. Set the dial mode (page 18) to match the type of telephone service you have (tone or pulse). L If the last number dialed was more than 48 digits long, the number will not be redialed correctly. L If you press {REDIAL} after you have started dialing, this button functions as the {PAUSE} button. To redial, do not dial any numbers before pressing {REDIAL}. L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called handset is in use. Try again later.
The handset does not ring. I cannot make a call.
I cannot redial by pressing {REDIAL}.
I cannot make long distance calls. I cannot page the handset.
