PANASONIC KXTG2403B
Manual de Usuario

Getting Started
1-D Wall Mounting
This unit can be mounted on a wall phone plate.

Section 1

3
1
Back Side

1

Adjust the angle of the cradle: #Slide the lock 2 switch to �RELEASE�. $Rotate the cradle 90° until it faces straight up. %Slide the lock switch to �LOCK� with the cradle facing straight up.

#Tuck the telephone line cord inside the wall mounting adaptor. $Connect the telephone line cord to the unit. %Install the adaptor by pushing it in the direction of the arrow.
�The word �UP� should face upward.

1

3 2

3

Back Side

4

Connect the telephone line
�Raise the antennas.

2

Connect the AC adaptor.

cord. Mount the unit, then slide down.

To Power Outlet

2

Making/Answering Calls
2-A Making Calls

Section 2

2-B Answering Calls
If the handset is off the base unit, press (TALK).
�You can also answer a call by pressing any dialing button (0) to (9), (*) or (#) (� Any Key Talk).

1 2 3
TALK Indicator (TALK) (CH) (REDIAL)

Press (TALK).
�The TALK indicator lights. �If an alarm tone sounds, see 6-F.

Dial a phone number.
To hang up, press (TALK) or place the handset on the base unit.
�The indicator light goes out.

OR

If on the base unit, just lift up.

To redial the last number dialed
,
Press (TALK) \ (REDIAL).

Selecting the ringer volume
The TALK indicator light must be off. �To select HIGH (preset) or LOW, press � or �. Each time you press � or �, the ringer volume will change and the selected volume will ring. �To turn the ringer OFF, press and hold � until 2 beeps sound. �To turn the ringer ON, press �. The ringer will sound at the HIGH level. �When you replace the battery, the selected ringer volume setting will return to the factory set.

To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available. Press � or � while talking. �Each time you press � or �, the volume level will change.

If noise interferes with the conversation
� For best operating performance, see section 6-D. Press (CH) to select a clearer channel or move closer to the base unit.