No hay comentarios de productos.
Making Calls
To dial after con�rming the entered number 1 Enter a phone number. To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial list.
3334444 Clear
1 Press [REDIAL].
Pause
� If you misdial, press Clear. Enter the correct number. � If a pause is required for dialing, press Pause where needed (p. 34). � To cancel, press [OFF].
333-4444 Exit
Erase
� The last number dialed is displayed.
2 Scroll to the desired number by
pressing [ ] or [ ].
� You can also scroll through the list by pressing [REDIAL]. � To exit the list, press [OFF] or Exit.
2 Press [ ] or [ ]. 3 To hang up, press [OFF] or
place the handset on the base unit.
3 Press [
] or [
If noise interferes with the conversation
Have the unit select a clearer channel by doing one of the following: Press [ ] (Channel) if talking using [ ], press [ ] (Channel) if talking using [ ], or press CH, which is displayed when you adjust receiver or speaker volume (p. 19). OR Walk closer to the base unit.
� To erase an item, scroll to the desired item then press Erase. � If �No items stored� is displayed, the list is empty.
To put a call on hold
Press Hold during a conversation.
Talk (VE) 00-00-08 Hold
� �Hold� is displayed.
To return to the call, press [ [ ].
> >
To redial the last number dialed
Press [ ] or [ [REDIAL]. ], then press
� If another phone is connected on the same line, you can also return to the call by lifting its handset. � If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected. � The alarm volume corresponds to the ringer volume level (p. 15). If the ringer is OFF, the alarm will sound at the LOW level.
>
].
>
] or
18
|