|
Usuarios conectados
Actualmente hay 5934 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Making Calls
Make sure that the power is ON (p. 12).
1 2
Press ��
. � is displayed.
Dial a phone number. � The dialled number is displayed.
� If � � flashes and an alarm tone sounds after pressing , move closer to the base unit. Then try again. � You can choose whether to display the length of the call or phone number in the talk mode by programming (p. 41).
To select the receiver volume
12345678
� After a few seconds, the display will start showing the length of the call.
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM. While talking, press F or G to select the desired level. � The display shows the volume level.
Ex. LOW is selected. Receiver Volume LOW HIGH
00-00-00
3
To hang up, press or place the handset on the base unit. � The handset will return to the stand-by mode.
To dial after confirming the entered number
� After a few seconds, the display will return to the length of the call.
OR
In the stand-by mode, proceed as follows.
1
Enter a phone number. � The entered number is displayed. � If you misdial, press I. Digits are erased from the right. � To cancel, press I firmly. � If your line has rotary or pulse service, any access numbers entered after pressing will not be included when dialling.
1 2 3
Press F . Press G or F until the arrow points to �Program�, then press OKH. Press G or F until the arrow points to �Receiver Volume�, then press
2
Press . �� � is displayed. � After a few seconds, the display will start showing the length of the call. To hang up, press or place the handset on the base unit. � The handset will return to the stand-by mode.
OKH.
4 5
Press F or G to select the desired level. Press OKH. � The display will return to �Receiver Volume�. To return to the stand-by mode, press C or wait for 60 seconds.
3
16
|
|
|
> |
|