5. Feed the wires through the center of the interface bracket and connect the wires to the Doorphone Module. 6. Attach the front of the Doorphone to the bracket using the supplied 10 mm (3/8") M3 threaded screws. Note: The Doorphone can be installed directly into a wall recess without using the interface bracket. Use the mounting template on page 15 for drilling positions. Use the supplied 25 mm (1") screws to fix to the wall (see Figure 11).
Figure 10
Figure 11
Note: To ensure the correct fitting of the Doorphone, please do not allow the screw head to protrude more than 3mm (1/8") beyond the interface bracket.