PANASONIC KXFPC95C
Manual de Servicio

1 REPLACEMENT PARTS LISTS
1.1. REFERENCE CHART
Reason for Change *The following items (1-8) indicate the reason for change. See the �Notes� column for each part in ORIGINAL AND NEW PARTS COMPARISON LIST(S) . 1. Improve performance Remarks: 2. Change of material or dimension *a: To improve the electric conduction. 3. To meet approved specification *b: For improvement of FAX communicaiton. *c: To facilitate the production process. 4. Standardization *d: To share the part with other models. 5. Addition *e: For the countermeasure of noise. 6. Deletion *f: For the countermeasure for copy NG. 7. Correction *g: To change of material. 8. Other *h: The factory for production is transferred from Malaysia to China. (The place of production described in the name plate is changed from "Made in Malaysia" to "Made in China".) *i: To improve the performance of PAPER TOP SENSOR. *j: To improve how to set up. *k: To collect error writing. *l: Sales company´s request Interchangeability Code **The following items (V-Z) indicate the interchangeability. See the �Notes� column for each part in ORIGINAL AND NEW PARTS COMPARISON LIST(S) . Parts Set Production V Original Early (before change) Original or new parts may be used in early or late production set. New Late (after change) Use original parts until exhausted, then stock new parts. W Original Early (before change) Original parts may be used in early production sets only. New parts may be used in early or New Late (after change) late production sets. Use original parts where possible, then stock new parts. X Original Early (before change) New parts only may be used in early or late production sets. New Late (after change) Stock new parts. Y Original Early (before change) Original parts may be used in early production sets only. New parts may be used in late New Late (after change) production sets only. Stock both original and new parts. Z Other

Note: Alphabets in the �Remarks� column in the following lists correspond to the alphabets in the �Remarks� in REFERENCE CHART.

1.2.
1.2.1.
Ref No.

ORIGINAL AND NEW PARTS COMPARISON LIST(S)
KX-FPC91
Part Name & Descriptions Pcs/Set Remarks Notes

Part No. Original Part No. New Part No. CABINET AND ELECTRICAL SECTION 14 PFBX1095X1 PFBX1095Y1 32 PFHR1189Z PFHR1189Y 34 PFHR1190Z PFHR1190Y 35 PFHR1192Y PFHR1192X 45 PF0U1022Z PF0U1022Y 51 -------------PFHX1457Z 58 -------------PFQT1749Z 65 PFKV1025Y1 PFKV1025X1 132 PFUA1024Y PFZMFM189E

BUTTON, DIALER GUIDE, THERMAL HEAD (LEFT) GUIDE, THERMAL HEAD (RIGHT) COVER, THERMAL HEAD PHOTO ELECTRIC TRANSDUCER, IMAGE SENSOR(CIS) SPACER,SHEET (Refer to UPPER CABINET SECTION) LABEL,OPEN RELEASE (Refer to BACK COVER 1) COVER, UPPER TURN (Refer to BACK COVER 1) CHASSIS KIT, GEAR BASE (Refer to MOTOR SECTION)

1 1 1 1 1 2 1 1 1

*k *f *f *f *a *f *I *j *d

7 1 1 1 1 5 1 1 4

Z W W W V W X W W

Note: Change Parts of Ref No.32 and No.34 at the same time. ACCESSORIES AND PACKING MATERIALS A4 PFQW1396Z PFQW1500Z ANALOG BOARD PARTS X101 PFVBTS399Z C161 ECEA1HKA100 C174 ECEA1EU4R7 C190 ECEA1EU4R7 C195 ECEA1AKA101 C208 ECEA0JU221 C251 ECEA0JU102

INSTRUCTION BOOK (QUICK START SHEET)

1

*d

4

Y

PFVBZT399Z ECEA1CKS100 ECEA1HKA4R7 ECEA1HKA4R7 ECEA0JKA101 ECEA0JK221 ECA0JM102

CERAMIC FILTER CAPACITOR, 10P CAPACITOR, 4.7 CAPACITOR, 4.7 CAPACITOR, 100P CAPACITOR, 220P CAPACITOR, 1000P

1 1 1 1 1 1 1

*d *a *a *a *a *a *a

4 1 1 1 1 1 1

V V V V V V V

2