13. Cleaning 13.1.2 Lower glass 1 Disconnect the power cord. 2 Lift the top cover release lever (1) and open the top
cover (2). Important: L Close the manual input tray (3) before opening the top cover.
4 Clean the lower glass (1) with a soft and dry cloth.
1
2 1 4 5
5 Reinstall the drum and toner unit (1) by holding the
tabs.
3
1
Caution: The fuser unit (4) gets hot. Do not touch it. Note: L Do not touch the transfer roller (5).
3 Remove the drum and toner unit (1) by holding the
tabs. L Make sure that the triangles (2) match to install the drum and toner unit correctly.
