(From Section 9.5) 2 Item (19)-a Save Setting (Select memory) Select a menu of Setting Item by pushing � (19)-b Save Setting (Memorize scanning condition to EEPROM) Set the parameter by pushing � or � � key. � � or � � key.
(19)-a
Push �
� or �
� key until
19. Save Setting xxxx
is indicated.
xxxx; � Memory 1 � or � Memory 2 � Select Memory Number (1 or 2) to store scanning condition parameters.
No
Renew the scanning Condition?
Yes Select a menu of Setting Item by pushing � � or � � key.
(19)-b
Push �
� or �
� key until is indicated.
19. Save Setting Exec =<>
Pushing �
� and �
� keys at
the same time.
Set new scan condition parameters (for Item 1 to 18 on the Scan Setting Mode) to the selected memory.
(To Section 9.5.1.1) 3
Yes
Change the parameter of another item for Scan Setting Mode? No Push key once.
