SONY KVPF21M40
Manual de Servicio

Using Your New TV

Getting Started
Step 1
Connect the antenna (PF21P10)
If you wish to connect a VCR, see the �Connecting a VCR� diagram below.

Notes � If you connect a stereo VCR, connect the yellow plug to (the yellow jack) and the white plug to (the black jack). � If you connect a VCR to the � (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV. � When no signal is input to the connected video equipment, the TV screen becomes blue.

Using Your New TV

CAUTION
Do not connect the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.

Rear of TV

IEC connector (not supplied) Antenna cable (not supplied)

Step 2
Insert the batteries into the remote
Note � Do not use old batteries nor use different types of batteries together.

or

Step 3
: Signal flow

Preset the channels automatically

� 9 �
4
Using Your New TV

Front of TV

1

2
VHF LOW

1

1

KV-PF21L70/PF21M40/PF21M70/PF21P10 KV-PF21P40/PF21P41/PF21Q70

B/G

Tips � If you want to stop automatic channel presetting, press SELECT twice. � If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 9). Note (KV-PF21M40/PF21M70 only) � During automatic channel presetting, your TV screen will indicate �B/G�, �I�, �D/K� or �M� for the TV system.

Now You Are Ready. . . To watch your TV, see page 11.
Using Your New TV

5

RM-952