JVC KV-MR9000E
Manual de Usuario

Before using the remote controller: When you use the remote controller for the first time, pull out the insulation sheet as illustrated to the right. � Aim the remote controller directly at the remote sensor on the color monitor. Make sure there is no obstacle in between. � Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

(back side)

Pull out Insulation sheet (The battery has been installed when shipped from the factory.)

Replacing the battery
When the controllable range or effectiveness of the remote controller decreases, replace the battery. 1. Remove the battery holder. While pushing in the lock using a ball-point pen or a similar tool (1), pull out the battery holder in the direction indicated by the arrow (2).
(back side)

2 1

2. Replace the battery. Slide a new battery into the holder with the + side facing upwards so that the battery is fixed in the holder.

WARNING: � Store the battery in a place which children cannot reach. If a child accidentally swallows the battery, immediately consult a doctor. � Do not recharge, short, disassemble or heat the battery or dispose of in a fire. Doing any of these things may cause the battery to give off heat, crack or start a fire. � Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. � When throwing away or saving the battery, wrap in tape and insulate; otherwise, it may cause the battery to give off heat, crack or start a fire. � Do not poke the battery with tweezers or similar tools. Doing this may cause the battery to give off heat, crack or start a fire.

Lithium coin battery (product number: CR2025)

CAUTION: DO not leave the remote controller in a place (such as dashboard) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

3. Return the battery holder. Insert the battery holder again pushing it until you hear a clicking sound.
(back side)

7

ENGLISH