6-3. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
Note: � All capacitors are in µF unless otherwise noted. � All electrolytic capacitors are rated at 50V unless otherwise noted. � All resistors are in ohms. k� = 1000�, M� = 1000k� � Indication of resistance, which does not have one for rating electrical power, is as follows. Pitch: 5 mm Rating electrical power 1/4W (CHIP: 1/10W) � : nonflammable resistor. � ¢ : internal component. � : panel designation, or adjustment for repair. � All variable and adjustable resistors have characteristic curve B, unless otherwise noted. � Readings are taken with a color-bar signal input. no mark : PAL ( ) : SECAM [ ] : NTSC 3.58 : NTSC 4.43 � Readings are taken with a 10 M� digital multimeter. � Voltage are dc with respect to ground unless otherwise noted. � Voltage variations may be noted due to normal production tolerances. � All voltages are in V. � : Can not be measured. � Circled numbers are waveform reference. * � : B + bus. � : B � bus. � : signal path. Reference information RESISTOR : RN : RC : FPRD : FUSE : RS : RB : RW :* COIL : LF-8L CAPACITOR : TA : PS : PP : PT : MPS : MPP : ALB : ALT : ALR
«
»
METAL FILM SOLID NONFRAMMABLE CARBON NONFLAMMABLE FUSIBLE NONFLAMMABLE METAL OXIDE NONFLAMMABLE CEMENT NONFLAMMABLE WIREWOUND ADJUSTMENT RESISTOR MICRO INDUCTOR TANTALUM STYROL POLYPROPYLENE MYLAR METALIZED POLYESTER METALIZED POLYPROPYLENE BIPOLAR HIGH TEMPERATURE HIGH RIPPLE
Note:The component identified by shading and mark ! are critical for safety. Replace only with part number specified.
