a
4 Deflection yoke 5 Four screws (Tapping screws)
1 Turn up one side of the rubber cap in the direction indicated by the arrow a. 2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.
1 Anode cap
c
Cushion
� 12 �
(2) For KV-G21K3
Anode button
3 When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c.
3 C board 4 Deflection yoke 2 A board 5 Four screws (Tapping screws)
�
HOW TO HANDLE AN ANODE-CAP
1 Anode cap
1 Do not damage the surface of anode-caps with sharp shaped objects. 2 Do not press the rubber too hard so as not to damage the inside of anode-caps. A metal fitting called the shatter-hook terminal is built into the rubber. 3 Do not turn the foot of rubber over too hard. The shatter-hook terminal will stick out or damage the rubber.