|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
KV-EX34M39/EX34M69/EX34M87
Using Your New TV
Getting Started
CAUTION � Do not connect the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. � To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately wash it away with water.
Notes � If you connect a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack). � If you connect a VCR to the 8 (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV. � When both the (S video input) and t 1 (video input) are connected,
KV-EX29M63
RM-963
RM-964
Using Your New TV
the (S video input) is automatically selected. To view the video input to t 1 (video input), disconnect the S video cable. � When no signal is input from the connected video equipment, the TV screen becomes blue.
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Rear of TV Antenna cable (not supplied)
Step 2
Insert the batteries into the remote
b
or
IEC connector (not supplied)
Note � Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
: Signal flow Front panel
8 �
Antenna cable (not supplied)
Connecting a VCR
To watch the video input, press t (see page 12).
To � (antenna) Antenna cable (not supplied) Rear of TV
1
L(MONO)
4
R
MENU
AUTO PROGR
ENTER
SELECT
PROGR
To antenna output
2
AUTO PROGR
b
AU TO PROGRA M PR : 0 1 T V S Y S : AU TO VH F L OW
1
VCR
WOOFER
R
4
L
Y
CB
CR
1
AUDIO VIDEO R VIDEO IN VIDEO OUT L
2
3
S video cable (not supplied) To S video To output (S video input)
To video and audio outputs
To T 1, 2, or 3 (video input)
Tips � To stop the automatic channel presetting, press MENU. � If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 38).
Audio/Video cable (not supplied)
(yellow) -L (MONO) (white) -R (red)
: Signal flow
4
Using Your New TV
Using Your New TV
5
|
|
|
> |
|
