White balance adjustment
1. 2. 3. Input an all-white signal. Enter into the Service Mode by pressing �TEST�, �TEST� and �MENU� �MENU�on the Service Commander. Move the OK button down until �MCP CXA2101�is selected then move the OK button to the right.The �MCP CXA2101� menu will appear on the screen. Select �19 R DRIVE� by moving the OK button down until �19 R DRIVE� is selected then move the OK button to the right and adjust to 41 by pushing the OK button up or down. Press the OK button to write the data. Adjust the �21 G DRIVE� and �23 B DRIVE� so that the white balance becomes optimum. Press the OK button to write the data. Input a 5 - 10 NIT all-white signal. Select �25 R CUT-OFF� by moving the OK button down until �25 R CUT-OFF� is selected then move the OK button to the right and adjust to 41 by pushing the OK button up or down. Adjust the �27 G CUT-OFF�, and �29 B CUT-OFF� so that the white balancebecomes optimum. Press the OK button to write the data.
Adjustment menu
RED GREEN BLUE CBLK AKB T BLK SW DA TEST HY SW PICTURE LIMIT LEVEL HUE SYSTEM COLOR AGE WHT AGE BLK BRIGHT YS/YM SW YM/VM SHARPNESS D COL G DRIVE CLP SW B DRIVE CLP MSK R CUT OFF ABL MODE G CUT OFF ABL TH B CUT OFF SUB BRT H SEP SEL FIX SEL V - TC H WIDTH HD TC HS MASK CB OFF SET 1 CR OFF SET 1 CB OFF SET 2 CR OFF SET 2
Data Amount
ON ON ON OFF OFF OFF OFF 0 57 1 31 1 31 OFF OFF 31 0 0 35 0 ADJ 1 ADJ 0 32 2 ADJ 1 ADJ ADJ 1 0 2 0 1 1 7 7 7 7
