Switching on at Your Desired Time � On Timer
EJECT
MUTING
POWER
DISPLAY
You can preset your video TV to automatically switch on at a desired time. You can select the TV program or video playback to be switched on.
1 Press MENU to display the main menu. 2 Move the cursor to �ON TIMER SET� with +
The ON TIMER SET menu appears.
ON TIMER SET 20:00 2 4 . 1 1 SUN
INPUT TIMER REC SELECT ON SCREEN ON/OFF CLEAR PICTURE MODE
or �
and press ENTER.
+ --
MENU
ENTER
EN
1 4 7 -/-ON TIMER SLEEP INDEX
2 5 8 0
VOL
3 6 9 C
PROGR
TIME : 6:00 SOURCE : TV P RO G 1 ON TIMER : OFF
Select
a n d p r e s s ENTER
3 Press ENTER.
The timer setting hour section turns red. or � and press ENTER.
+ --
+ -AUTO/ MANUAL
4 Set the hour with +
The minute section turns red.
TRACKING
5 Set the minutes (by one minute) with +
The cursor appears beside �TIME.�
or �
and press ENTER.
REC COUNTER RESET PAUSE SEARCH
6 Move the cursor to �SOURCE� with +
FF
or �
and press ENTER. or � and press
PLAY REW STOP
7 Select TV or VCR z (video playback) to be switched on with +
and press ENTER. When you select TV, select the program position with + ENTER.
ON TIMER SET 20:00 2 4 . 1 1 SUN
or �
TIME : 7:30 SOURCE : TV P RO G 12 ON TIMER : OFF
Select
a n d p r e s s ENTER
8 Move the cursor to �ON TIMER� with +
or � and press ENTER, then select ON with + or � and press ENTER. The ON TIMER lamp on the front of the video TV lights up.
To erase the message Press any button on the video TV or Remote Commander.
9 Press MENU to go back to the original screen.
If you are not using the video TV, press POWER on the Remote Commander to set the video TV in standby mode. At the preset time, the video TV automatically switches on and a message �Good morning� is displayed for five minutes. If you do not press any button for 2 hours, the video TV automatically shuts off. To cancel on timer function 1 Press ON TIMER. The ON TIMER SET menu appears. 2 Press ON TIMER again to select OFF.
Additional Operations
