Removing the cassette mechanism assembly (See Fig.9)
Prior to performing the following procedure, remove the front chassis, the heat sink, bottom cover and the main amplifier board assembly. 1. Remove the four screws G attaching the cassette mechanism assembly from the top cover.
Cassette mechanism assembly
G
G
G
Fig. 9
G
Top cover
H
Removing the (LCD & key) control switch board (See Fig.10 to 12)
Prior to performing the following procedure, remove the front panel assembly.
H
H
1. Remove the four screws H attaching the rear cover on the back of the front panel assembly. 2. Unjoint the nine joints f with the front panel and the rear cover. 3. Remove the control switch board on the back of the front panel.
Front panel Joint f
