<Removal of the cassette mechanism> Removing the head amplifier P.W.B. (See Fig.1 and 2)
1. For the 6pin harness extending from connector CN402 on the head amplifier P.W.B, disconnect it from the head relay P.W.B. 2. Disconnect the card wire from connector CN403 on the head amplifier P.W.B. 3. Remove the screw A attaching the head amplifier P.W.B. 4. Move the tab a as shown in Fig.2 and remove the head amplifier P.W.B. while moving it in the direction of the arrow.
CN402 CN403 CN402 Head relay P.W.B.
6pin harness
CN403 Head amplifier P.W.B.
Fig.1
Removing the cassette assembly (See Fig.1 to 3)
mechanism
A
Head amplifier P.W.B.
1. Disconnect the 6pin harness from connector CN402 and the card wire from CN403 on the head amplifier P.W.B. (Refer to Fig.1 and 2). 2. Remove the four screws B cassette mechanism. on the bottom of the
