Removing the gear base assembly / take up gear / reflector gear (See Fig.34 to 36)
1. Push in the pin e� of the gear base assembly on the upper side of the body and move the reflector gear toward the bottom, then pull out. 2. Remove the polywasher on the bottom and pull out Gear base assembly the take up gear. 3. Move the gear base assembly in the direction of the arrow to release it from the two slots f� of the main chassis. REFERENCE: The parts are damaged when removed. Please replace with new ones. Fig.34
Pin e'
Slot f'
Slot f'
Polywasher Take up gear
Reflector gear
Fig.35
Removing the reel driver / reel spindle (See Fig.36)
Reel driver
Reel driver Reel driver spring Reel spindle Gear base assembly
1. Draw out the reel driver from the shaft on the main chassis and remove the reel driver spring and the Reel driver spring reel spindle respectively. CAUTION: The reel driver is damaged when removed. Please replace with a new one.
Reel spindle