|
No hay comentarios de productos.
KS-FX220
2.1.7 Removing the cassette mechanism assembly (See Fig.7) � Prior to performing the following procedure, remove the front chassis, the heat sink, bottom cover and the main amplifier board assembly. (1) Remove the four screws F attaching the cassette mechanism assembly from the top cover.
Cassette mechanism
F
F
F
Top chassis
Fig.7 2.1.8 Removing the head amplifier board (See Fig.8) � Prior to performing the following procedure, remove the front chassis, the bottom cover, the heat sink, the main board assembly and the cassette mechanism assembly. (1) Remove the screw G attaching the head amplifier board. (2) Move the head amplifier board in the direction of the arrow to release the two joints f and remove. (3) Disconnect the wire from CJ901 on the head amplifier board.
F
Head amplifier board CJ901 joint f
joint f To head relay board
G
Fig.8
(No.49770)1-5
|
