adjustments
You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own adjustments in memory. � There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
To turn on or off the loudness function.
Each time you press LOUD, the loudness function turns on and off alternately. See page 11 for details.
LOUD
1
Call up the sound mode you want to adjust.
� See page 11 for details.
SOUND
5 6
Repeat steps 2 and 3 to adjust the other items. Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
BEAT POP SOFT LOUD
SOUND
2
Select �BAS� (Bass) or �TRE� (Treble).
BEAT POP SOFT LOUD
7
Repeat the same procedure to store other settings.
To reset to the factory settings
3
Adjust the bass or treble level.
� See page 11 for details.
Repeat the same procedure and reassign the preset values listed in the table on page 11.