KS-FX202
Removing the cassette mechanism assembly ( See Fig. 8 )
1. 2. 3. 4. 5. Removing the front chassis. Removing the bottom cover. Removing the heat sink. Removing the main board assembly. Remove the four screws ( 6 ) retaining the cassette mechanism. 6. Separate the top chassis and cassette mechanism.
Cassette mechanism 6 6
Front side
6 Top chassis Fig. 8
g A Front cover g
6
g 7 h h
Removing the operation switch board ( See Fig. 9 to 11 )
1. Detaching the front panel unit. 2. Turn the front panel back side down. 3. Remove the four screws ( 7 ) retaining the front cover. 4. Open the front cover gradually by disengaging the three engagements ( g ) while pushing the top of the front cover in the arrow "A" direction, then disengage the three engagements ( h ) on the both sides. 5. Place the front panel unit front side down. 6. Disengage the three engagements ( i ) on the bottom to separate the front cover from the front panel. (Be careful not to lose the button springs.)
