Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
Notes: � A previously preset station is erased when a new station
is stored in the same preset number. � Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
1
Select the band (FM1 � 3, AM) you want to store stations into (in this example, FM1).
Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see �Storing stations in memory� on pages 7 and 8.
FM1 AM
FM2
FM3
1
Select the band (FM1 � 3, AM).
2
Tune in to a station (in this example, of 88.3 MHz).
Press ¢ to tune in to stations of higher frequencies. Press 4 to tune in to stations of lower frequencies.
FM1 AM
FM2
FM3
2
Select the number (1 � 6) for the preset station you want.
MO RPT
3
Press and hold the number button (in this example, 1) for more than 2 seconds.
�P 1� flashes for a few seconds.
4
8
Repeat the above procedure to store other stations into other preset numbers.
