SECTION 2 Disassembly method
2.1 Main body 2.1.1 Removing the front panel assembly (See Fig.1) (1) Press the release button and remove the front panel assembly.
Front panel assembly
Release button
Fig.1 2.1.2 Removing the bottom cover (See Fig.2) � Prior to performing the following procedure, remove the front panel assembly. (1) Turn the body upside down. (2) Insert a screwdriver under the joints to release the two joints a on the left side, the two joints b on the right side and the joint c on the back of the body, then remove the bottom cover from the body. CAUTION: When releasing the joint c using a screwdriver, do not damage the main board.
Bottom cover
Joint b Joint a
Joint b Joint a
Joint c Fig.2
2.1.3 Removing the front chassis (See Fig.3) � Prior to performing the following procedure, remove the front panel assembly and bottom cover. (1) Remove the screw A on each side of the body. (2) Release the two joints d and two joints e on the sides, then remove the front chassis toward the front.