KS-AX6700
5. Remove the 6 screws E retaining the panels on both sides of the main unit.
Rear panel
E
Fig. 5
Front panel
E
Fig. 6
F
6. Remove the 13 screws F attaching the main P.C. board to the bottom of the main unit. (The GND wire that protrudes from the main P.C.board must be re-installed to its original position during re-assembly.)
GND wire
Main P.C. board
F
Fig. 7
Main P.C. board
7. To remove the wire ass'y, lift up the main P.C. board a little.
Wire assemb'y