Inserting Batteries into the Remote Control
� Make sure you insert the batteries using the correct polarities. � Always remember to dispose of used batteries in an environmental friendly way. � To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately wash it away with water.
Connecting the Aerial and VCR
Two Scart adaptors and one S Video cable are supplied, other connecting cables are not supplied.
EN
or
� We recommend you to connect your VCR as it is shown. � To get the TV output signal, set the Scart adaptor connected to :2/q 2 switch to �OUT�. � To get the TV input signal, set the Scart adaptor (conected to :3/q 3 ) switch to �IN�. � If your VCR provides S Video output, we recommend you to use the supplied S Video cable and connect it to C2 instead of C3 for a better picture quality.
