1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly. 2) Remove the door open lever from the control panel. 3) Remove two screws which secure the timer assembly. 4) Remove the timer assembly. 5) Pull out the timer knob from the timer. 6) Pull out the timer coupler from the timer. 7) Remove the screw which secure the V.P.C coupler. 8) Pull out the V.P.C coupler, V.P.C knob and flat spring from the control panel. 9) Remove the door open button and button spring from the control panel. 10) Reverse the above steps for reassembly.
6. To remove high voltage capacitor.
1) Remove a screw which secure the grounding ring terminal of the H.V. diode and the capacitor holder. 2) Remove the H.V. diode from the capacitor holder. 3) Reverse the above steps for reassembly.
x High voltage circuit wiring
7. To remove magnetron.
1) Remove a screw which secure the magnetron. 2) Remove the magnetron. 3) Reverse the above steps for reassembly.
