1 Press the DNPP button on the remote control.
"DNPP" will appear in the display, and the disc name preset play mode is entered. The names of all the discs in the disc changer will appear successively in the display for five seconds each. Discs whose names have not been preset will appear as "NO NAME" in the display.
NOTE
Switching Display for Discs
Switch the display that appears whilst discs are playing.
Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows.
Track time Disc name (DNPS) Disc title (Units featuring CD text/MD only) Track title (Units featuring CD text/MD only)
NOTE
� This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing. � Discs in the disc changer that have never been played before will appear as "NO ACCES" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCES" display after inserting a disc magazine, try playing it using the disc scan or a similar function to display the disc name. Also note that "NO DISC" will be displayed when a disc has not been loaded.
Rapid display (forward / reverse): Press the DISC+ or DISC� button. Pressing the DISC+ button will rapidly display the preset names/disc titles in order. Pressing the DISC� button will rapidly display the preset names/disc titles in reverse order. 2 When the name appears for the disc you want to play Press the OK button. The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end. To cancel DNPP mode: Press the DNPP button. The disc name preset play (DNPP) mode will be cancelled.
� You can give names to discs through the presetting disc name function (see p.22). Note that depending on the unit, display may not be possible. � If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead. � When an attempt is made to display the title of a disc for which a disc title/track title has not been recorded, the CD will display "NO TEXT", the MD player built into this unit will display "NO TITLE", and an MD changer will display "NO NAME/NO TITLE". � Depending on the type of characters of the CD Text, some characters may not be displayable.