Disc control features (See page 6)
Playing MDs
Playing MDs: A press of the release button causes the faceplate to drop to the front, thereby exposing the MD slot. Insert the MD in the proper orientation. The MD will start playing. Push back on the right side of the faceplate with your hand until it locks. The ¢ indicator will light when an MD has been inserted.
2CAUTION
� Do not use the unit with the faceplate in the open condition. Doing so will cause breakdown.
When inserting an MD, make sure the MD has been completely drawn in before pushing back the faceplate. Failing to do so might deform the MD. Playing MDs Already Inserted: Press the SRC button repeatedly until the MD mode is obtained. "MD" is displayed when the MD mode has been selected. The MD will start playing. Pausing and Restarting MD Play: Press the 38 button to make the disc pause. Press the same button again to start play again. Eject: Press the release button and drop 0 open the faceplate. Press the 0 button located near the MD slot. The MD stops playing and ejects from the slot. Push back on the right side of the faceplate with your hand until it locks.
2CAUTION
� When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. � Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.