SONY KLX9200M
Manual de Servicio

Additional Information

Resetting the adjusted items to the factory preset levels
Resetting an individual item in the menu displayed on the screen

Resetting all of the items in the menu at the same time

Cleaning the air filter

4

Remove the dust from the filter with a vacuum cleaner.

1 2

Press MENU. Press v or V to select the menu you want to reset, and press ENTER.
VIDEO ADJUST CONTRAST BRIGHTNESS COLOR HUE SHARPNESS RESET 80 50 50 0 50

ENTER

Vacuum cleaner

After about 300-hours of use, the message, �CLEAN THE FILTER,� will appear on the screen. In this case, clean the air filter. When it becomes difficult to remove the dust, replace the filter with a new one. To clean the filter, follow the steps below.

EX I T

5

Attach a new filter to the monitor. Fit the four projections to the monitor securely.

1

Press MENU.
MENU

3

Press RESET on the monitor. All of the items in the menu displayed on the screen will be restored to the factory preset levels.
RESET

1 2

Turn off the power switch on the monitor and unplug the power cord. Remove the front panel from the monitor.

2

Press v or V to select the menu which contains the item to be reset, and press ENTER.
VIDEO ADJUST CONTRAST BRIGHTNESS COLOR HUE SHARPNESS RESET 80 50 50 0 50

GB

ENTER

6
Resetting the adjusted items for the signal currently displayed on the screen
Press RESET on the monitor while there is no menu on the screen. All of the adjusted items for the current signal (other than VIDEO ADJUST and OPTION) will be restored to the factory preset levels.
RESET

� 19 �
3
ENTER

Mount the front panel. Be careful not to damage the speakers.
Notes

EX I T

Press v or V to select the item you want to reset, and press ENTER.

� Clean the air filter when the message, �CLEAN THE FILTER,� appears on the screen. If you do not, internal heat may build up.
Hold the monitor tightly.

� Do not use a torn filter. Fit the four projections on the filter to the monitor securely. Dust inside the monitor may cause picture distortion and fire. � Be sure to attach the air filter securely; otherwise, the monitor will not turn on. � Contact your Sony dealer for a new filter.

BRIGHTNESS

50

4

Press RESET on the monitor. The selected item in the menu will be restored to the factory preset level.
RESET

Resetting all of the adjusted items
Press and hold RESET on the monitor for more than 2 seconds. All of the adjusted items for the monitor will be restored to the factory preset levels.
RESET

Grasping the left end of the front panel with your fingers, pull the panel towards you. Repeat this step with the right end of the panel. Be careful not to catch your fingernails.

3

Pull the air filter upwards to remove.

26-GB

Operations

Additional Information

27-GB