Caring for Your Cooktop
Sealed surface burners and cooktop
Cleaning the surface burners
� You should routinely remove and clean the only) burner cap burner caps. Always clean the burner caps after a spillover. Keeping the burner caps clean prevents improper ignition and an uneven flame. � For the proper flow of gas and ignition of the burner, DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS, OR ANY OTHER MATERIAL TO ENTER THE GAS TUBE OPENING. � Gas must flow freely through the gas tube opening for the burner to light properly. You must keep this area free of any soil and protect it from boilovers or spillovers. ALWAYS keep the burner cap in place whenever a surface burner is in use. � Let the cooktop cool before cleaning. Alignment pins � Do not use oven cleaners, bleach, or rust removers. � Do not obstruct the flow of combustion and ventilation air.
Porcelain (top side
Ignitor
Burner base
� Occasionally check the burner flames for proper size and shape as shown. A good flame is blue in color. If the flames are uneven, you may need to clean the burners.