Reset the AM tuning step from 9 kHz (the factory preset step) to 10 4. Raise or lower the volume. kHz when using the tuner in North, Central or South America.
Basic Operation of Tuner
5. Turn the source OFF.
1. Select Tuner.
Each press changes the Source ... Hold for 1 second
2. Select the desired band.
Entering the Function Menu
In this menu you can select tuner functions.
� Select desired mode in the Function Menu.
FM1 FM2 FM3 � AM
3. Tune the receiver to a higher or lower frequency.
Each press changes the Mode ... Each press of FUNCTION button selects mode in the following order: BSM � Local
�STEREO �
This product�s tuner lets you select tuning by changing To cancel Function Menu, press the BAND button. length of time you press the button.
Note:
� After entering the Function Menu, if you do not perform an operation
Manual Tuning (step by step) 0.3 seconds or less within about 30 seconds, the Function Menu is automatically canceled.
Seek Tuning (automatically) 0.3�2 seconds
Manual Tuning (continuously) 2 seconds or more
Note:
� �STEREO � indicator lights when a stereo station is selected. � To select a weak broadcasting station that cannot be tuned in with the Seek
