- Removing the Case(not shown) 1. Remove the three screws. 2. Remove the Case. - Removing the Cassette Mechanism Assy
(not shown)
1. Remove the four screws. 2.Disconnect the connector, and then removing the Cassette Mechanism Assy. - Removing the Panel Unit(Fig.1) Disengage the stopper at two locations indicated Remove the Panel Unit.
Panel Unit
Fig.1
- Removing the Tuner Amp Unit(Fig.2) Removing the two screws.
Removing the three screws.
Removing the screw.
Unbend the tabs at four locations indicated by arrow until straight. Remove the Tuner Amp Unit.
