KD-SX980
Removing the MP3 board (See Fig.9)
Prior to performing the following procedure, remove the top cover. 1. Disconnect the wire from connector CN601on the MP3 board. 2. Remove the five screws G and the MP3 board, releasing the joint g and h.
G
g
h
CN601
G
Fig.9
Removing the CD mechanism assembly (See Fig.10)
Prior to performing the following procedure, remove the front chassis, the heat sink, bottom cover and the main amplifier board assembly. 1. Remove the three screws H attaching the cassette mechanism assembly from the top cover.