2.1.3 Removing the front chassis assembly (See fig.3,4) � Prior to performing the following procedure, remove the front panel assembly and the bottom cover. (1) Remove the screws A on the both sides of the body. (2) Remove the screws B on the front side of the body. (3) Release the two joints d and the two joints e on the both sides of the body, using a screwdriver.
Joint d
A
Joint e
Joint d
Joint e Front chassis assembly Fig.3
B
Fig.4 2.1.4 Removing the heat sink (See fig.5) (1) Remove the two screws C and the two screws D on the left side oft the body.
D
C
D
Heat sink
Fig.5 2.1.5 Removing the rear panel (See fig.6) � Prior to performing the following procedure, remove the front panel assembly, the front chassis, the heat sink and the bottom cover. (1) Remove the three screws E , the three screws F and the three screws G on the back of the body. Remove the rear panel.
