JVC KDSX8350
Manual de Servicio

KD-SX8350

2.1.3 Removing the front chassis assembly (See fig.3,4) � Prior to performing the following procedure, remove the front panel assembly and the bottom cover. (1) Remove the screws A on the both sides of the body. (2) Remove the screws B on the front side of the body. (3) Release the two joints d and the two joints e on the both sides of the body, using a screwdriver.

Joint d

A

Joint e

Joint d

Joint e Front chassis assembly Fig.3

B
Fig.4 2.1.4 Removing the heat sink (See fig.5) (1) Remove the two screws C and the two screws D on the left side oft the body.

D

C

D

Heat sink
Fig.5 2.1.5 Removing the rear panel (See fig.6) � Prior to performing the following procedure, remove the front panel assembly, the front chassis, the heat sink and the bottom cover. (1) Remove the three screws E , the three screws F and the three screws G on the back of the body. Remove the rear panel.

G F

E

F

G F

E
Fig.6

(No.49782)1-5