Su carrito de compras está vacío
|
Productos
|
Información
|
Destacado
|
|
No hay comentarios de productos.
KD-S743R/KD-S741R
2.2.18 Removing the turn table / spindle motor (See Figs.41 and 42) � Prior to performing the following procedure, remove the top cover, connector board, chassis unit and clamper assembly. (1) Remove the two screws L attaching the spindle motor assembly through the slot of the turn table on top of the body. (2) Unsolder the wire on the connector board if necessary.
Turn table
L
Fig.41
L
Turn table
Spindle motor Fig.42
1-22 (No.49810)
|
|
 |
> |
|
|
Parse Time: 0.164 - Number of Queries: 102 - Query Time: 0.036