Manual preset
ENGLISH
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. Ex: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.
Notes: � A previously preset station is erased when a new station is stored in the same preset number. � Preset stations are erased whent the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.
1
Select the band (FM1 � 3, AM) you want to store FM stations into (in this example, FM1).
� Each time you press the button, the FM band changes as follows:
FM
Tuning into a preset station
You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see �Storing stations in memory� on page 9 and 10.
FM1 FM2 FM3 AM
1
Select the band (FM1 � 3, AM).
AM
FM
2
Tune into a station of 88.3 MHz.
Press ¢ to tune stations of higher frequencies.
SSM
FM1 FM2 FM3 AM
AM
Press 4 to tune stations of lower frequencies.
2
Select the number (1 � 6) for the preset station you want.
7 8 MO 9 10 11 RPT 12 RND
3
Press and hold the number button (in this example, 1) for more than 2 seconds.
�P1� flashes for a few seconds.
4
Repeat the above procedure to store other stations into other preset numbers.