Other features (See page 8)
2 When the name appears for the disc you want to play
Press the OK button. The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end.
Audio Control Setting
Adjust various parameters of sound quality.
1 Press the AUD button to enter the control mode. 2 Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it. � When preout is switched to unbalanced
w
To cancel DNPP mode: Press the DNPP button. The disc name preset play (DNPP) mode will be cancelled.
Bass
w
N-F Level
v
(
Only when Non-fading output is set to on
)
Treble
w
Fader
v
Balance
� When preout is switched to balanced
w
Bass
w
Sub-preout level
v v
(
Only when monaural output is set to on
)
Treble
Balance
Source tone memory Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Press the 4/¢ button. Look at the table (See page 26) to adjust the mode being displayed. 4 Press the AUD button to end the control mode.
