|
|
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
- CONTENTS
- CONNECTIONS
- BLOCK DIAGRAM
- COMPONENTS DESCRIPTION
- MICROCOMPUTER'S TERMINAL DESCRIPTION
- MECHANISM ASS'Y DISASSEMBLY PROCEDURE
- CD CHANGER MECHANISM OPERATION DESCRIPTION
- PC BOARD (COMPONENT SIDE VIEW)
- PC BOARD (FOIL SIDE VIEW)
- SCHEMATIC DIAGRAM
- EXPLODED VIEW (UNIT)
- EXPLODED VIEW (MECHANISM)
- PARTS LIST
- SPECIFICATIONS
No hay comentarios de productos.
KDC-C465/Y
ADJUSTMENT
LPS initial position adjustment procedure
Connect the changer to the H/U. While holding the magazine eject button of the changer, press the reset button of the H/U and, in about 1 second, release the magazine eject button. Press the CD button of the H/U to enter the E-88 mode. Move the mechanism deck to around the 1st stage by pressing the DISC- or DISC+ button. Insert the adjustment tool into the tool hole on the changer mechanism. Then press the DISC+ button to move the mechanism deck until the mechanism�s slider hits the adjustment tool. When the motor locks (stops) press the REPEAT key of the H/U. When the REPEAT key is pressed, the mechanism moves automatically to the 1st stage and the initial position adjustment completes. (The data is written in the E2PROM at this time.)
4
|
|
|
> |
|
