Installation â� Locking the faceplate to the unit
If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below.
1 Refer to the function "Theft Deterrent Faceplate" (page 10) and
remove the faceplate.
2 Insert the provided screw into the hole at the center of the
bottom side of the faceplate which you have removed from the unit.
Accessory7
3 Push back the bottom of the faceplate bracket unit it locks. 4 Refer to the section "Theft Deterrent Faceplate (page 10)" and
then reattaching the faceplate.
2CAUTION
Never insert the taptite screws (ø2 � 4 mm) in any other screw holes than the one specified. If you insert it in another hole, it will contract and may cause damage to the mechanical parts inside the unit.